how to create patterns either rectangular or angular in proe

how to create patterns either rectangular or angular in proe2001?

You can search the Pro/ENGINEER tips category for the following 19 tips regarding patterns in Pro/ENGINEER. Not sure which if any are specific to Pr/E2001:


A Tip For When Ref Patterns Get Confused.
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=2368
Source:Synthesis Engineering Services

Creating Circular Patterns With A Single Ring
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=4517
Source:CAD Digest Weekly

Creating Hole Patterns Around The Edge Of A Plate-the Smart Way
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=3128
Source:ProFiles Magazine

Detailing Assembly With Ref Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=12681
Source:MCADCentral.com

Driving A Table-driven Pattern Through Relations
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=3103
Source:ProFiles Magazine

How To Create Triangular Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=3132
Source:ProFiles Magazine

Modeling Tricks For Making Patterns.
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=2387
Source:Synthesis Engineering Services

Pattern Relations
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=15276
Source:CADQuest.Com

Patterns In Pro-engineer
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=14962
Source:Eng-Tips.com

Patterns To Follow A Curve
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=2612
Source:Synthesis Engineering Services

Polygons And Patterns In Sketches
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=14165
Source:MSM Groups

Pro/engineer Tip-of-the-month: When Ref Patterns Get Confused
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=9779
Source:Synthesis Engineering Systems

Rotational Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=4466
Source:MCAD Central

Speeding Up Large Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=3133
Source:ProFiles Magazine

Speeding Up Large Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=11538
Source:ProFilesMagazine.com

Tricks To Making Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=14201
Source:CADProe Forums

Using Groups To Make Patterns Of Feature Patterns.
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=2393
Source:Synthesis Engineering Services

Working With Patterns
http://www.3dcadtips.com/go.php?topic=1&action=rated&link_id=2451
Source:CADmin.co.uk

Thanks.

3DCADTips Q&A Board Support.