How to hide entity display tags?

#1 (**permalink**) January 11th, 2006, 01:21 AM

This is a question from a previous post. We wanted to post it separately so other could find the answer more easily.

Question:
I have an assembly with lots of holes and the tags don't let me see, how do I hide them?

Click here to read the original thread from ffigueres.
http://www.3dcadtips.com/QABoard/fo...=Pro%2FE+Wildfire&order=time

#2 (**permalink**) January 11th, 2006, 01:23 AM

» Question:
» I have an assembly with lots of holes and the tags don't let me see, how do I hide them?

:-) In wildfire 2.0 go to View -> Display Settings -> Datum display. You can turn off the tags there (assuming you want to see the centrelines for the holes) or you can turn of the axis display, as required.

Thanks for using the Q&A Board!;-)

3DCADTips Q&A Board Support

#3 (**permalink**) January 13th, 2006, 05:41 AM

:-) You can use the Pro/E config file to set the display mode for various display entities such as:

display_axis_tags (yes/no)
display_coord_sys_tags (yes/no)
display_dwg_tol_tags (yes/no)
display_plane_tags (yes/no)
display_point_tags (yes/no)

Thanks for using the Q&A Board! ;-)

3DCADTips.com Q&A Board Support

#4 (**permalink**) March 3rd, 2006, 03:30 PM

The Support Desk has located another reply related to your post.

I'm in 2001, View > Display Settings > Datum Display.

Maybe this will work for you.

kuncar
Partner site, MCADCentral.com