Results 1 to 8 of 8

Thread: Break Out View

  1. #1
    Join Date
    Feb 2008
    Posts
    5

    Default Break Out View

    Hi all,

    first, sorry for my english.

    I've got a demo version of VX CAD but I don't know how make
    break out view in drawings like inventor.

    Thank you in advance

    Marco

  2. #2
    Join Date
    Feb 2006
    Posts
    323

    Cool

    Hello Marco,

    What are you referring to as a "break-out" view? Can you provide an example? I know that VX CAD does support the following types of drawing layout views:
    • Standard View (Top, Front, Side, etc.)
    • Projection View (1st and 3rd angle projections from another view)
    • Auxiliary View (projected perpendicular from an edge on another view)
    • Section Views (Full, Aligned, Revolved, Bent sections defined from another view)
    • Detail Views (Scaled Circular and Rectangular views from another view)
    Does the view you need fit any of these criteria?

    Thanks.
    3DCADForums Help Desk

  3. #3
    Join Date
    Feb 2008
    Posts
    5

    Default

    Hi,

    I try to explain

    It's when you want to section only a region with a hole not entire part.

    If you want I post an image.

    Thank you

    Marco

  4. #4
    Join Date
    Feb 2008
    Posts
    5

    Default

    This link explain the break out view of inventor:

    http://www.sdotson.com/freetut/broke...on%20views.pdf

  5. #5
    Join Date
    Feb 2006
    Posts
    323

    Cool How VX does it.

    Hello Marco,

    Here is how you do it in VX:

    In the drafting module, I assume that you have a layout of a 3D part.
    1. Select Insert > 3D View > Sections
    2. In the options form under Required Inputs, select "Revolved"
    3. Select the side view with the hole.
    4. Select the base point so that you are on the centerline of the hole.
    5. Pick vertical.
    6. Adjust the Base arrow or the Align arrow so you are not sectioning all the way through the part.
    Let me know if you need images.
    Good Luck!

  6. #6
    Join Date
    Feb 2008
    Posts
    5

    Default

    Thank you for the reply.

    If you can post some images help me very much.

    Bye

  7. #7
    Join Date
    Feb 2008
    Posts
    5

    Default

    Quote Originally Posted by support View Post
    Hello Marco,

    Here is how you do it in VX:

    In the drafting module, I assume that you have a layout of a 3D part.
    1. Select Insert > 3D View > Sections
    2. In the options form under Required Inputs, select "Revolved"
    3. Select the side view with the hole.
    4. Select the base point so that you are on the centerline of the hole.
    5. Pick vertical.
    6. Adjust the Base arrow or the Align arrow so you are not sectioning all the way through the part.
    Let me know if you need images.
    Good Luck!
    Hi,

    I have cretae a section with your instruction, but it's not that I need

    In english is called, Broken Out section

    Another exmple is in this link:

    Broken-out sections

    thank you in advance

  8. #8
    Join Date
    Dec 2011
    Posts
    3

    Default You can insert the break out view in ZW3D 2012 SP2

    It used to be VX, not it has a new name ZW3D, if you get the up-to-date ZW3D 2011 SP2, you can get the break out view during the 2D sheet, I hope the information is helpful for you.

Similar Threads

  1. Give Me A Break!
    By Wallybanger in forum CATIA Forum
    Replies: 1
    Last Post: October 29th, 2008, 03:45 PM
  2. Get rid of Break-away View Sections
    By ZNewman in forum CATIA Forum
    Replies: 1
    Last Post: September 23rd, 2008, 10:01 AM
  3. Break out view
    By Barak in forum Inventor Forum
    Replies: 1
    Last Post: July 28th, 2008, 10:00 AM
  4. Explode View
    By Azriel in forum Pro/ENGINEER Forum
    Replies: 2
    Last Post: July 23rd, 2007, 08:48 AM
  5. Copy part & then break link or ties with original.
    By kpolyak in forum SolidWorks Forum
    Replies: 3
    Last Post: July 9th, 2006, 03:48 AM

 

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •