Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2016
    Posts
    1

    Default Could use some help with scan to 3d

    We just got a new 3d scanner at work. It attaches to our faro arm that is used for measuring. I brought a wood piece from home to try out the scan to 3d option in Solidworks. I have run through the point cloud to mesh wizard about 5 times now. When the point cloud is opened it looks nice and clean. There are about 2.2m points in the file. Once I run it through the wizard it turns out looking really bad. I have tried different options with not much change in the results. Do you have any ideas what it is I may be doing wrong? Here is a screen shot of before and after the wizard.

    Before(point cloud) Capture.jpg

    After (mesh) Capture1.jpg

    Point cloud file https://www.dropbox.com/s/3tw58vtvis...guard.txt?dl=0

    Thank you for any help you can offer.

  2. #2
    Join Date
    Oct 2016
    Posts
    3

    Default

    You didn't mention which scanner and scanning software you use for it. Myself I Use Artec Spider with Artec soft and have no problems with imported meshes.

 

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •