For example: I have created a model with 15 Parameters with different values. I have to reduce all the 15 Parameters by 1 mm, how can i reflect this on CATIA using a function so that all different Parameters are reduced by 1 mm without manually changing them all one at a time.
CATIA parameters don't work like that. You would have to write an equation (formula) for each of the 15 parameters to change their values, so it would be much easier to just change them one-by-one. Is this something you plan to do frequently?
One thought I had, was to create a Design Table in Excel based on the CATIA parameters. Using Excel, you could easily change all the values which would feed back and update the CATIA parameters.
Last edited by MrCATIA; October 11th, 2018 at 10:33 AM.
Thanks alot for the reply. Yes,the modifications will be done often just to check the results and obtain a solution in a less time . I understand that by individually changing them also works but needs time, and hence i was wondering if all parameters needs to be inc/dec by 1 mm, if it could be done faster minimising the time.
If you already have the parameters in the CATIA model, making the Design Table is easy. Then you can create different configurations of your design with different values for each parameter based on Excel formulas. Save everything for future changes.
Respectfully
I waited for an instruction but as I didn't receive any respond, I had to find an alternative myself and eventually could to recreate the back surface and connect it to the front...
Hello
After a few days effort, labor and exercise I finally could simulate the front layer of the seat approximately, but now I don't know how to create the back layer. Please offer a method that...
I had the computer time today from 19-23 in fact i used the siemens nx for approximately one hour and still have 20 minutes but it is tiring and time consuming(especially doing multitasking)
...
Hi guys Fortunately I wrote help and I found out that moving the object is with ctr +t big success big progress.
but the program turned off I turned again on I ould not use the search button...
Hi guys can you help me with moving the object becaue really I want to have results with moving the cone, blocks, fins and boosters in the siemens nx .
my email is lordmichaelbezos@gmail.com
Respectfully I waited for an instruction but as I didn't receive any respond, I had to find an alternative myself and eventually could to recreate the back surface and connect it to the front...
How do I create the back layer of...