Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2017
    Posts
    5

    Default GSD Close Curved Surface

    What is the best way to close the opening in this surface in GSD?
    Attached Images Attached Images

    •   AltAdvertisment

        

  2. #2
    Join Date
    Jul 2006
    Posts
    1,628

    Default

    If you have a part with history, the best way to eliminate the big opening in the middle is to delete the trimmed surfaces, and create a brand new surface (or surfaces) across the top. Probably using Extrude and Split, depending on the surface geometry that's already there. But before you do anything, Scan through that history to understand how that opening got there in the first place.

    If you just have a dumb model, the fastest way is probably to add a Fill Surface based on all the edge curves, and maybe impose tangency.

    If you don't like the Fill results with the dumb model, try an Intersection to get the cross section, Extrude it, and Split the surface with the edge curves.

    Which ever method works for you, you probably want to Join everything into a single surface when you're done.
    Last edited by MrCATIA; February 22nd, 2019 at 09:37 PM.

 

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •