Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2019
    Posts
    3

    Default Surface Pattern Creation Problem..

    Recently i am facing a problem when i m trying to use circular pattern for a surface.
    At the selection of the object to pattern i cant select the surface cause i receive the
    feature definition error " select a part design element" as it depicted below.

    Defin error.jpg

    Moreover when im trying to reproduce the following tut,
    http://catiadoc.free.fr/online/cfyug...larpattern.htm
    i cannot select any of the features (pattern etc).

    unselectable.jpg

    Does anyone know the solution for the issue..

    Thanks

    •   AltAdvertisment

        

  2. #2
    Join Date
    Jul 2006
    Posts
    1,668

    Default

    Change the workbench from Part Design to Generative Shape Design, and try the Circular Pattern command again.
    Last edited by MrCATIA; July 5th, 2019 at 07:31 AM.

    •   AltAdvertisment

        

  3. #3
    Join Date
    Jul 2019
    Posts
    3

    Default

    Yes, That works fine for me..

    Thanks.

    •   AltAdvertisment

        

  4. #4
    Join Date
    Jul 2019
    Posts
    3

    Default

    Yes, That works fine for me..

    Thanks

  5. #5
    Join Date
    Jul 2019
    Posts
    12

    Default

    Also try keeping solid operations in a body and geometrical features from GSD (like Fill) in a Geometrical Set. If you grow your model with keeping everything inside one Body you will have a hard time with moving around it.

  6. #6

    Default

    Thanks for such a variable post, thanks for highlighting this issue.

 

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •