Continue to Site

Welcome to 3DCADForums

Join our CAD community forums where over 25,000 users interact to solve day to day problems and share ideas. We encourage you to visit, invite you to participate and look forward to your input and opinions. Acrobat 3D, AutoCAD, Catia, Inventor, IronCAD, Creo, Pro/ENGINEER, Solid Edge, SolidWorks, and others.

Seeking CAD person in Tucson

CAD_Kid

New member
i need a CAD person for some freelance work. project is a cast iron turbo manifold. pay will be fixed-per-project TBD between me and designer. i need to try and keep this project cost down so i will also allow designer to have his/her "signature" or logo in the casting. the target market for my product is relatively small but i expect to have 500 units in 1st run of production.

i myself have limited experience with 3D design using Rhino3D, and i simply do not have the time to dedicate to doing 3D stuff.

please PM me with your contact info.

thanks
 
CAD Services for Turbo manifold

Hi,
I am Tushar,the program manager for Indus USA Inc.
We have a good team of engineers here in Michigan who can do the CAD modelling,design, surfacing and drawing job of yours. We have done lot of projects in Automotive Manifolds,casting etc.
If possible let me know your detail requirements and contact details.
Regards,
Tushar
248-630-6209
[email protected]
 
i need a CAD person for some freelance work. project is a cast iron turbo manifold. pay will be fixed-per-project TBD between me and designer. i need to try and keep this project cost down so i will also allow designer to have his/her "signature" or logo in the casting. the target market for my product is relatively small but i expect to have 500 units in 1st run of production.

i myself have limited experience with 3D design using Rhino3D, and i simply do not have the time to dedicate to doing 3D stuff.

please PM me with your contact info.

thanks

William Borgelt Cad
13664 Serena Dr.
Largo, Fl 33774
(727) 595-6813
[email protected]

Offering employers over ten years experience as SolidWorks R&D Designed
Twenty years plus experience as a Machinist/Tool Maker

Summary of qualifications
• Study blueprints, drawings, and sketches to determine material dimensions, required equipment, and operations sequences
• Modified and revised designs to correct operating deficiencies and to reduce production problems
• Drafted detail drawings of parts fabricated by machine shop or by outside contractors
• Able to use cad to help in intricate setup
• Shop mathematics

Sept 2, 2008 - Jan 9, 2009 Florida Metal Stamping Inc. Largo, Fl 34647
Job Title: Document, Q.C.
• (727) 541-6441 ext 112
• Inspect engineering drawing for a inspection machine called
“Vertex LaserQC® — Advanced, Automated Quality Inspection
System for 2D Inspection. MORE @
2D Inspection, Statistical Process Control (SPC), Quality Control Inspection, Flat Part and Sheet Metal Inspection - Virtek
• Supervisor; Ray Brown QC Manager (727) 541-6441 ext 112
• Laid off lack of sales


JULY/1999-DEC/2001- JUNE / 2004 – MAR /2008 W.I.S.E. Corporation Largo, Fl 33773
Job Title: Document, Cad Operator
• Designed parts for pre-hung door machine.
• Designed, researched and developed parts, assemblies, drawings for Pre-Hung Door Machines, Stair Runner and other Router Machine with Solidworks Office 1998-2008 3D Modeling Software
• Reviewed project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing.
• Conferred with technicians and submitted reports of test results to engineering department and recommended design and material changes.
• Prepared part sketches and wrote work orders and purchase requests to be furnished by outside contractors
• Laid off, lack of sales

Career history:
1973 - JULY 31, 1999 Honeywell Inc. Clearwater FL.
Job Title: Machine and grinder operator
• Operate and setup machine: South Bend Tool Room Lathes, All Hardinge Tool Room Lathe, All Bridgeport Series Standard Mill, saws, drill press and Universal Three Dimensional Pantograph Engraving Machines. Brown And Sharp OD/ID Grinder
• Working Shop Foreman 5 Years
• Design tooling and fixture.
• Attended Honeywell School on campus for Geometric Dimensioning and Tolerance and Microsoft Office 95-97.


Education:
SOLIDWORKS ESSENTIAL COURSE BY SOLIDWORKS AUTHORIZED TRAINING CENTER
Special Technical Vocational Certifications at St. Petersburg Junior College:
• AUTOCAD INTRODUCTION TO AUTOCAD 3 1998
• INTERMEDIATE AUTOCAD 1999
• SOLIDWORKS 1 2005
• SOLIDWORKS 2 2006
 
Cad Person Wanted in Tucson

I am responding to your post in the 3D Cad seeking a 3D designer/drafter in Tucson. I am a Mechanical Designer with a Level 2 Certification in AutoCad and a great deal of experience with Solidworks. I currently living in Platteville, Wi but am planning to relocate to Tucson in the next few weeks. I would live to discuss any opportunities avialable and my qualifications for the position.
I am pasting a copy of my resume to this post. I appreciate your consideration.
Best Regards,
Daniel McWilliams
DANIEL A. McWILLIAMS, JR. Email: [email protected]
465 Kase Street Cell: (608) 732-6348
Platteville, WI 53818 Msg: (608) 330-1172

PROFILE
 Dedicated professional attitude; mature and willing to work.
 Equally effective working independently and in cooperation with others.
 Energetic, loyal and creative.
 Work hard, learn fast, willing and able to assume responsibility.

WORK EXPERIENCE
3/1999 - 4/2008 Design Engineer Sperian Eye & Face Protection, Inc Platteville, WI (formally known as Fendall, Inc)
• Mechanical design and engineering of portable industrial eyewash equipment.
• Responsible for all technical documentation for new and existing materials, products, plant facilities and processes.
• Graphic layout of product installation and support manuals.
• Creation of graphics for all product labels and shipping cartons using all types of computer aided drawing and graphic programs.
• Assisted in and Project Manager for new products and improvement of all existing products.
• Provided customer support and handled vendor contact for part and product development.
• Traveled to vendor sites (such as Kennedy Space Center) to provide support and make “on-site: product modifications and develop new product.

10/1998 – 3/1999 Mechanical Designer John Deere Works Dubuque, IA
• Documentation of plant utilities, layout of plant facilities and mechanical design using AutoCAD 2D and 3D software.

1/1998 – 10/1998 Mechanical Designer John Deere Tractor Assembly Works
Waterloo, IA
• Design and layout of plant facilities and assembly line equipment using AutoCAD CADAM software.

OTHER COMPANIES EMPLOYED AT:
Eagle Point Software, Dubuque, IA. – Software Support and Development Technician.
John Deere Engine Works, Cedar Falls, IA – Mechanical/Structural Designer
Cimetta Engineering and Const., Tucson, AZ – Structural/Mechanical Designer
Hughes Aircraft Corp., Tucson, Arizona – CADAM Drafter
Du Pont Corp. Research Lab., Wilmington, DEL. – Mechanical Designer


DANIEL A. McWILLIAMS, JR.
Page 2


EDUCATION
University of Cincinnati Completed 90 credit hours toward Bachelor Degree in Civil Engineering

PROFIENCIES
 28 years experience in both technical board and computer aided drafting and design.
 10 years experience in graphic layout and illustration.
 Approximately 3000 hours IBM 5080 CADAM experience.
 Approximately 15,000 hours AutoCAD experience.
 Autodesk LEVEL 2 Certification – AutoCAD R.14.
 Approximately 1,000 hours SolidWorks R.2001 – R.2007.
 Proficient in the use of Adobe Illustrator, Photoshop, Acrobat and other graphic layout, illustration and three dimensional modeling and rendering programs.
 Extensive knowledge of work processing, spread sheet, video editing and presentation Software.
 Experienced performing FMEA for existing and new products.
 
Designer

i need a CAD person for some freelance work. project is a cast iron turbo manifold. pay will be fixed-per-project TBD between me and designer. i need to try and keep this project cost down so i will also allow designer to have his/her "signature" or logo in the casting. the target market for my product is relatively small but i expect to have 500 units in 1st run of production.

i myself have limited experience with 3D design using Rhino3D, and i simply do not have the time to dedicate to doing 3D stuff.

please PM me with your contact info.

thanks

HI
I am here in Houston, TX and working with oil company. Please email me at [email protected]. Thanks
 

Articles From 3DCAD World

Sponsor

Back
Top