Welcome to 3DCADForums
Join our CAD community forums where over 25,000 users interact to solve day to day problems and share ideas. We encourage you to visit, invite you to participate and look forward to your input and opinions. Acrobat 3D, AutoCAD, Catia, Inventor, IronCAD, Creo, Pro/ENGINEER, Solid Edge, SolidWorks, and others.
Surface loft question ?
- Thread starter bianchi77
- Start date
cadasio
New member
if you are trying to loft between both sketches then your sketches are not suitible
1. You may find it easier to split it into 4 sketches - otherwise you will need to use the selection manager to individually slect the splines (so 4 splines instead of 2 sketches)
2. They don't intersect. Even if I move your second sketch so the "dips" line up, they don't intersect which will result in a dodgy surface (if it manages to create one).
Ultimatley I would recommend doing the surface tutorial built into SolidWorks or watching a few videos to get an understanding of the fundamentals of surfacing.
1. You may find it easier to split it into 4 sketches - otherwise you will need to use the selection manager to individually slect the splines (so 4 splines instead of 2 sketches)
2. They don't intersect. Even if I move your second sketch so the "dips" line up, they don't intersect which will result in a dodgy surface (if it manages to create one).
Ultimatley I would recommend doing the surface tutorial built into SolidWorks or watching a few videos to get an understanding of the fundamentals of surfacing.