Help needed in creating composite curve

[CadSync]

I don't know how to create a composite curve, a curve made by joining some continuous curves, in ProE Wildfire. Any suggestions?
Thanks in advance.

 

[PolySurf]

Creating composite curves in WildFire.

CadSync,

Creating composite curves requires the Freeform Surfacing ISDX package. The instructions to accomplish this task are listed below:

******************************
To Combine Curves
Click or Styling > Curve Edit. The Freeform Surfacing dashboard appears. The curve collector is active by default.

Select a curve, right-click its endpoint, and select Combine.

If there is more than one neighbor curve at the endpoint, Pro/ENGINEER prompts you to select which curve to combine with the selected curve.

Click to complete the curve operation.

The two curves are merged into a single curve, which changes shape in order to maintain smoothness.
******************************
1. Select "Style Tool" and create your curves:

2. Curve 1 [green] & curve 2[blue]:

3. Edit the curve holding down the SHIFT key & align the endpoints where you want to connect the curves. Right click on the end point & select COMBINE:

4. The curves are now one composite curve:

Hope that helps!
PolySurf Design Services
PolySurf.com >> Home of PolySurf Design Services

 

[Lee]

Select the first curve and then hold down the shift key and select first curve again, then the curve you want to add to it. Then pick Edit -> Copy.